The NF5035-X USB-Based EMF/EMC Spectrum Analyzer offers lightening fast, full-featured spectrum analysis in a compact and convenient package. Ideal for bench-top / desktop laboratory use or remote spectrum monitoring, the NF5035-X is housed in a small, milled aluminum case (for maximum RF shielding) and is controlled via user-friendly PC software (included). Boasting the same specs as the NF5035 handheld EMC analyzer, this USB-based alternative is ideal for laboratory pre-compliance testing, research and development, exposure limits, and general EMF spectrum analysis applications, within a frequency range spanning from 1Hz – 1MHz (with optional 30MHz frequency extension). Additional USB-based RF analyzer models are available, in frequency ranges from 9kHz – 9.4GHz (HF6000-X) and from 9kHz – 20GHz (HF8000-X).

usb RF spectrum analyzer
 USB-Based X-Version EMF Analyzer

Models and General Specifications

In addition to these general specifications, there are numerous options and upgrades available to customize your NF 5030/5035-X USB EMC Analyzers to fityour specific application requirements. View Options, Upgrades, and Accessories. Please note that model numbers ending in “5” denote the USA version. Model numbers ending in “0” indicate manufacturer’s part number.

Each NF5030/5035-X Kit Includes:
1 – USB-Based EMC Spectrum Analyzer (1Hz – 1MHz)
1 – AC Power Adapter / Charger
1 – 6 foot USB cable
1 – Flash drive containing Spectrum Analyzer Software and user manuals
1 – Lightweight Aluminum Carrying Case

Model Specifications:
Frequency Range: 1Hz – 1MHz (20MHz and 30MHz Optional upgrades available)
Typical Level Range (Analog): 200nV to 200mV / -150bBm (Hz)
Typical Accuracy: 3%
Includes 12 Bit DDC Frequency Filter (Included in USA Version at no additional charge)
RBW Min: 0.3Hz
RBW Max: 1MHz
Units of Measurement: V, dBV
Lowest Sample Time: 10mS
60 MSPS
Superfast FFT Spectrum Analysis
High-Performance Digital Signal Processor
DIN/VDE 0848 Exposure Limit Calculation
True RMS Signal Strength Measurement
Average Measurement
Dimensions: 210 x 140 x 25mm
Weight: 700gr

View / Download General Technical Specifications
Support Materials and Software Download

usb spectrum analyzer
 USB Analyzer Used with PC Software
The SPECTRAN HF 6000-X Series Specifications and Technical Information
OVERVIEW:

Spectran V4 USB-Based RF Spectrum Analyzer – Affordable, Compact, and Reliable Desktop/Bench-top RF Test and Measurement
Download full Manufacturer’s HF 6000-X Series spec sheet and brochure here.

AaroniaUSA proudly presents the Spectran HF6000-X V4 series of USB-Based/PC-Based RF spectrum analyzers. Customizable features and functions, precision measurements, and affordability combine in this series of durable handheld analyzers – the ultimate multi-purpose tool for laboratory RF measurement. The Spectran V4 X-Version series of analyzers is built to detect RF frequencies, perform data logging and monitoring, and perform precision measurements and pre-compliance testing with easy control directly via the included PC software.

FEATURES AND FUNCTIONS

Benchtop Usage & Data Logging

The V4 Series of USB-based RF analyzers offers the capability to perform complex test and measurement with the included full-featured PC software. Complete with remote PC-based control, multi-device capabilities, and extended data logging, and playback, these full-featured analyzers are compact, affordable test and measurement powerhouses. The intuitive user-friendly spectrum analyzer software is capable of controlling multiple Spectran units, making it extremely easy to switch between several analyzers to perform extensive remote testing in multiple locations and multiple pre-determined frequency ranges.

OPTIONS, UPGRADES, and ACCESSORIES

12 Bit DDC Filer (Option 005): 12Bit DDC Filter optional upgrade. INCLUDED IN USA MODELS NF5035-X.

20MHz or 30MHz Frequency Extension (Option 010): Available only for the NF 5030/5035-X, this extending the upper-frequency range of the analyzer to 20 or 30MHz, even allowing measurements of VDSL2.

0.5PPM TXCO Timebase (Option 002): Available only for the HF60100 / 60105-X; this highly precise TXCO timebase offers significantly reduced phase noise and allows for narrower use of filters to enhance sensitivity. Extremely important for applications including time-domain measurements and code-selective measurements of UTMS. Standard accuracy without Timebase option is 50PPM.

9kHz Frequency Extension (Option 900): Available only for the HF60100 / 60105-X; this expansion extends the low-end frequency of the analyzer to 9kHz, ideal for the measurement of conducted emissions, according to interference standards such as EN55015 and EN61800-3.

40dB Low-Noise Preamplifier 1MHz-10GHz (Option 022): This option provides an external super-low-noise 40dB preamplifier, enabling maximum performance when measuring very weak low-end signals.

DC Blocker: Prevents RF input from being destroyed by DC voltages.

Calibration Resistor: Maintains the best possible calibration of the noise floor.

20dB Attenuator: Expands the measurement range to +40dBm (HF 60100/60105-X ONLY).

GPS Logger: This optional GPS logger offers 6 sensors (GPS, Gyro, 3D Tilt, Digital Compass, Height, and Accelerometer) and integrates with the analyzer directly to pinpoint locations. This is ideal for automatic for recording field measurements and generating heat maps (with Google Maps, for example), as well as visualization of network coverage for GSM, WLAN, etc.

Broadband Antennas: Spectran V5 Analyzers are fitted with high-quality SMA connectors that allow them to interface directly with our full line of precision broadband antennas, including directional LP antennas, low-frequency magnetic field tracking antennas, and omnidirectional radial isotropic antennas. These antenna models are available in optimized frequency ranges, and come in many varieties to suit countless RF analysis applications.

External Low Noise Pre-Amplifiers: Spectran V4 Analyzers also interface directly with our full line of external battery-powered LNA, to heighten sensitivity up to -170dB and sniff out extremely weak signals.

Near Field Probe Set: Available in passive and active models, AaroniaUSA near field probe sets offer 5 probes with or without 40dB preamplifier, to sniff out weak signals in near-field EMC testing applications.

Cables and Connectors: AaroniaUSA offers a wide variety of compatible cables and connectors, including 1 meter, 5 meter, and 10 meter SMA cables, DC blockers to prevent the 50 Ohm SMA input from being destroyed by DC voltages, 20 dB attenuator to expand the measurement range to 33dBm, SMA-SMA connectors, SMA-N connectors, and more.

The Spectran V4 Series of Handheld Spectrum Analyzers

Video Demonstration of the Spectran V4 Series