Connectors/Adapters

DC-Blocker
 DC Blocker (SMA)
The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents damage to the input of RF analyzers by blocking up to 18 VDC. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc., lines.
calibration-resistor
 Calibration Resistor
For the Spectran V4 (SMA), this calibration resistor is necessary to calibrate the noise-floor (Firmware BETA26 up). The new noise floor calibration feature can be activated at any time with the new “CalRun” function in the “Setup” menu. You only need to connect the calibration resistor to the rf-input of the SPECTRAN V4.
20dB-Attenuator-DC-18GHz
 20dB Attenuator (DC-18GHz)
Expands the measurement range from +20dBm to +40dBm.

Power/Batteries

Car Power Adapter (12V)
Car Power Adapter (12V)

To connect your Spectran to the car cigarette lighter / car accessory jack.

1300mAh NiMH Battery
 1300mAh NiMH Battery
1300mAh standard replacement NiMH-Battery for Spectran Handheld Spectrum Analyzer
3000mAh LiPo Battery
 3000mAh LiPo Battery
Extended charge upgrade battery for every Spectran HF or NF HandHeld Analyzer.
Universal AC Adapter–Charger
 Universal
AC Adapter–Charger
International 12V battery charger / power supply for Spectran Spectrum Analyzer.
12V 17.600mAh Powerbank
 12V 17.600mAh
Powerbank
12V version with 17600mAh, incl. 12V (1A) output with 300mm cable and 5V USB (2A) connector.
NOTE: Due to federal law, we cannot ship lithium batteries express. All lithium batteries ship ground.

Cables

SMA Cable 1m
SMA Cable 1m

One possible use for this SMA cable is connecting an Aaronia HyperLOG EMC test antenna to an Aaronia Spectran RF spectrum analyzer. The cable is included (as 1m version) in all measurement bundles that contain HyperLOG antennas.

SMA-Cable 10m LowLoss
 SMA-Cable 10m LowLoss
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analyzers with very low damping (signal loss). Optionally, you can also acquire an INDIVIDUALLY calibrated cable from us (including corresponding calibration table).
SMA-Cable 5m LowLoss
 SMA-Cable 5m LowLoss
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Optionally, you can also acquire an INDIVIDUALLY calibrated cable from us (including corresponding calibration table).

Miscellaneous

Heavy Plastic Carrying Case
 Heavy Plastic Carrying Case
Shock resistant, heavy version with padding. Offers spaces for 2 SPECTRAN units with all accessories and a HyperLOG 70xx or 60xx antenna. Weight: 2.5kg. Dimensions: 50x43x12cm (L/W/D).
Spectran Protection Rubber (black)
 Spectran Protection Rubber (black)

Protects your unit agains shock and looks great! High-End silicone rubber-material. A must have for outdoor usage! Custom-fit casing for every SPECTRAN Spectrum Analyzer. Protects several contact points against external influences and allows full access to all functions. ROHS compliant. Weight: 120g. Dimensions: 25,5 x 9,5 x 3cm (LxWxH).