Options & Accessories


Option 0120: 120MHz RTBW

Extends the real-time bandwidth from 80MHz to 120MHz.
Available for the V6-RSA250X and the V6-RSA500X

Option 1120: 120MHz Vector Signal Generator
Extends the RSA250X with a vector signal generator (120MHz Tx).
Including option 0120 RTBW extension Rx!
Option 0245: 245MHz RTBW
Extends the real-time bandwidth from 160MHz to 245MHz.
Available for the V6-RSA2000X and V6 XFR PRO.
Option 1245: 245MHz Tx expansion
Extends the Tx data rate from 120MHz to 245MHz (signal generator).
Available for the SPECTRAN V6-RSA 500 or V6-RSA 2000.
Option 6080: Frequency Extension WiFi 6E
Frequency extension 6 – 8 GHz for WiFi 6E.
Especially for SPECTRAN V6 devices incl. external bandpass filter 6 to 8 GHz.
Option 0020: Ultra Low Noise Preamp
Note: The V6-RSA2000X requires two of these extensions
Option 0002: OCXO Timebase

5ppb (0.005ppm)
This high-precision OCXO time base, which was specially developed for the SPECTRAN® V6 X, leads to a significant reduction in phase noise (jitter). This allows the use of much narrower filters, which in turn significantly increases sensitivity. This option is indispensable to make full use of the maximum sensitivity! In addition, the OCXO time base enables much more accurate frequency measurement and display.

Option 0401: Internal GPS
Including spoofing detection and active GPS antenna with SMB cable
Option 0065: Extended Temperature Range
Extends the temperature range to -40°C to +75°C


26800 mAh Powerbank

The Aaronia Powerbank with its 26800mAh allows a high runtime extension of the SPECTRAN V6 with a laptop. The battery of the laptop is conserved because the SPECTRAN V6 is only operated via the Powerbank. The Powerbank is specially designed for the SPECTRAN V6 and provides the required voltage and power, and up to two additional devices can be supplied via USB. Allows a runtime of the SPECTRAN V6 of up to 4-5 hours. Automatically locking and stackable.

Note: No power supply or cable is included. Please order separately if required.

RF over Fiber (Rx/Tx)

Cable damping is a thing of the past! Aaronia’s RF over Fiber solution impresses with its extremely high dynamics and linear frequency response. This makes it possible for the first time to transmit RF signals quasi 1:1 via fiber optics. This allows cable lengths of up to 100km to be achieved. Additionally, a galvanic separation between transmitter and receiver is achieved. Also available as dual version (e.g. for use with SPECTRAN V6-RSA2000X). Automatically locking and stackable.

Requires “OS2 Single Mode” fiber optics with “LC connectors”.

4-Way Splitter/Combiner

External 4-way low-loss splitter/combiner (e.g. stitch multiple V6 units to expand the real-time bandwith), stackable.


High-directivity directional coupler. Provides outstanding directivity and excellent coupling flatness from 50 to 6000 MHz, making S-parameter measurements and intermodulation measurements as well as other test and system applications possible.

S-Parameter Kit

Kit for measuring the S-parameters
(SPECTRAN® V6 Coupler + pair of HighQuality SMA measurement cables 1m with tightening nuts)

RF Satellite Test Probe

The RF Satellite test probe allows direct measurement at the LNB output or at the satellite receiver. The measurement can be performed with simultaneous use of the connection, the probe offers two separate signal outputs for the connected spectrum analyzer as well as the receiver. This allows a signal evaluation and recording during normal operation. The built-in DC blocker suppresses DC voltage which would be dangerous for connected Spectrum Analyzers. The package includes the necessary cables (SMA to F adapter, 0.3m SMA cable, 1.5m F cable) for direct connection of the measuring device and the receiver.

Low pass filter – LPF75
Low pass filter DC to 75MHz, max. +36dBm
An absolute MUST HAVE for measurements below 80MHz with SPECTRAN V6.
RTSA-Suite PRO Block 4711 bypasses V6-internal bandpass filter and ensures calibrated field strength measurements inside 10-80MHz frequency range. Insertion loss up to > 90dB!

Connections (I/O): 1+1 SMA 50Ω
20dB SMA Attenuator

Expands the measurement range from +20dBm to +40dBm.

DC-Blocker (SMA)

The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc. lines.

Low Loss SMA Cable

This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Available in lengths of:

1 Metre | 5 Metres | 10 Metres

SMA to BNC Adapter

This special high quality adapter allows operation of all Aaronia Antennas with SMA connector with any standard Spectrum Analyzer with BNC connector.

SMA to K (2.92mm) Adapter

The Aaronia SMA to 2.92mm adapter is suitable for connecting Aaronia PowerLOG 40400 antennas via SMA Cable to a spectrum analyser or other device with regular SMA connectors (or N/BNC via additional adapter).

SMA to N Adapter

This special high quality adapter allows operation of all HyperLOG®-Antenna with any standard spectrum-analyzer with N connector.