Description
The SPECTRAN V6 X is Aaronia’s latest generation of high-performance real-time spectrum analyzers. The RSA 500X comes with a real-time bandwith of 80MHz (opt. 120 MHz), sweep speed of 300GHz/s (440 GHz/s) and includes an I/Q vector signal generator with 120MHz Tx (opt. 245MHz). The included software RTSA-Suite PRO is precisely tailored to the powerful and robust hardware and supports the use of multiple SPECTRAN V6 500X. The stackable aluminum housing facilitates the parallel use of several units. RSA 500X RF connectors: 1xRx, 1xTx 50 Ohm SMA each Scope of delivery: SPECTRAN V6-500X, power supply, 774-AC5 (data cable black | 1m | 1 screw), 774-CC11 (power cable red | 2m | 1 screw), 774-AC1 (boost cable black | 1m | 1 screw), USB stick with manual and software, cleaning brush
- RSA 500X RF connectors: 1xRx, 1xTx 50 Ohm SMA each
- Instantaneous receiver bandwidth of 80 MHz (opt. 120 MHz)
- Sweep speed: 300 GHz/s (440 GHz/s)
- I/Q vector signal generator bandwidth of up to 120 MHz
- FFT-based POI as short as 150ns (100ns)
- I/Q-based POI as short as 50ns (25ns)
- Unlimited continuously I/Q streaming via USB 3.0
- Extraordinary dynamic range from a 16-bit ADC at 2GSPS
- Radio Frequency range of 10 MHz to 6 GHz
- Sample rate: 500 MSPS (16 Bit Dual 256 MSPS I/Q-Data)
- FPGA: 930GMAC/s
- FFT rate: 960 Million FFT-points/s (120 Million FFTs/s)
- Stackable accessories
- Extremely compact and lightweight
- Full MATLAB support
- Including worlds leading “RTSA-Suite PRO” spectrum analysis software
- Made in Germany
Other Versions
Type RTBW / Sweep I/Os 
RSA250X (10MHz – 6GHz) RTBW: 80MHz (opt. 120MHz) Sweep: 250GHz/s 1xRx 
RSA2000X (10MHz – 6GHz) RTBW: 160MHz (opt. 245MHz) Sweep: 2THz/s 2xRx & 1xTx
Specifications
V6-RSA250X V6-RSA500X V6-RSA2000X Frequency Range (min) 10MHz 10MHz 10MHz Frequency Range (max) 6GHz 6GHz 6GHz Real-Time Bandwidth 80MHz/opt. 120MHz 80MHz/opt. 120MHz/245MHz 160MHz/opt. 245MHz Sweepspeed 250GHz/s 500GHz/s 2THz/s I/Os 1 Rx 1 Rx & 1 Tx 2 Rx & 1 Tx
TECHNICAL SPECIFICATIONS SPECTRAN V6 X Real-time bandwidth Rx 245 MHz (I/Q) Real-time bandwidth Tx 120 MHz POI (FFT-based) 97 ns POI (I/Q-based) 10 ns Max. power Rx +23 dBm Max. power Tx 3 dBm Displayed average noise level (internal pre-amp on) Typ. -170 dBm/Hz Amplitude accuracy (typ.) Typ. +/- 0,5 dB (compensated by FIR filter) USB bandwidth Up to 784 MBytes/s sustained throughput to PC Frequency reference accuracy 0,5 ppm (5 ppb via OCXO option) RBW (resolution bandwidth) 62 mHz to 200 MHz Measurement units Over 20 (e.g. dBm, dBμV, V/m, A/m, W/m², dBμV/m, W/cm²) Detector Min, Max, AVG, Peak, QPeak (in development) Attenuator range 36 dB (0,5 dB steps) Traces Over 20 (e.g. ACT, AVG, MAX, MIN, QPEAK) Measurement modes True IQ or Power/Frequency data Trigger Cursor, Measurement, Density ADC Dual 2GSPS 16 Bit DAC 2GSPS 14-Bit GPS GPS/QZSS, GLONASS, BeiDou and Galileo (concurrent reception) GPS synchronisation +/- 10ns timestamping in each data packet External Frequenc Reference Input typ. 10MHz, 3,5VRMS into 50 Ohm (SMB-connector) FPGA XC7A200T-2 DSP processing 930 GMACs SDRAM 2 GB RF connectors SMA (Rx,Tx), SMB (Trigger, Refclock, GPS, PPM). All 50 Ohms. Temperature range (operation) -40 °C to +60 °C Dimensions 210 x 115 x 30 mm Weight 850 g Power USB 3.2 Gen 1 Type-C PD 3.0 Power consumption Typical 15 W Country of origin Germany Recommended calibration interval 2 years
