***Discontinued*** The HF6000-X Series of RF Spectrum Analyzers features the same impressive specifications as the HF6000 Series of handheld spectrum analyzer, but is housed in a lightweight and durable milled aluminum case for bench-top or desktop use. Each HF6000 X-Version analyzer includes the compact USB-based spectrum analyzer hardware, an OmniLOG radial isotropic antenna, USB cable, and AC power adapter, as well as a foam-lined aluminum carrying case for easy transport. Ideal for pre-compliance testing and laboratory RF analysis, these USB-based spectrum analyzers are controlled via the included full-featured spectrum analyzer PC software, allowing data logging, playback in multiple views, unlimited marker points, and custom parameters and settings to match any RF analysis application. The USB-based HF6000-X series includes three models in various optimized frequency ranges, from 1MHz – 9.4GHz, with several various optional upgrades and accessories available to customize the analyzer to meet your test and measurement needs!
Models and General Specifications
In addition to these general specifications, there are numerous options and upgrades available to customize your HF6000-X USB Spectrum Analyzers to fit your specific application requirements. View Options, Upgrades, and Accessories. Please note that model numbers ending in “5” denote the USA version. Model numbers ending in “0” indicate manufacturer’s part number.
HF6000-X Models:
HF 6060/6065-X (9KHz – 6GHz) ***Discontinued***
HF 6080/6085-X (9KHz – 12GHz) ***Discontinued***
HF 60100/60105-X (9KHz – 16GHz) ***Discontinued***
Each USB-Based Analyzer Kit Includes:
1 – USB-Based RF Spectrum Analyzer
1 – Pre-installed 15dB internal preamplifier (USA version upgrade, included at no charge)
1 – OmniLOG 90200 Radial Isotropic Antenna (700MHz – 2.5GHz)
1 – AC Power Adapter / Charger
1 – 6 foot USB cable
1 – Flash drive containing Spectrum Analyzer Software and user manuals
1 – Lightweight Aluminum Carrying Case
View / Download General Technical Specifications ***Discontinued***
Support Materials and Software Download ***Discontinued***
HF 6065-X RF Spectrum Analyzer Specifications ***DISCONTINUED***
Frequency Range: 10MHz – 6GHz
Avg Noise Level (DANL): -135dBm(1Hz)
Avg Noise Level (DANL) PreAmp: -150dBm(1Hz)
Absolute Max Level: +10dBm
RBW Min: 10kHz
RBW Max: 50MHz
Lowest Possible Sample Time: 10mS, 1mS Optional
Typical Accuracy: +/-2dB
14Bit Dual-ADC
DDC Hardware Filter
150 MIPS DSP (CPU)
Standards-Conformant Exposure Limits (ICNIRP, BGV B11, BlmSchV, etc.)
Dimensions: 210 x 140 x 25mm
Weight: 700gr
HF 6000-X V5 Specifications and Information
Support and Download Materials
HF 6085-X RF Spectrum Analyzer Specifications ***DISCONTINUED***
Frequency Range: 10MHz – 8GHz
Avg Noise Level (DANL): -145dBm(1Hz)
Avg Noise Level (DANL) PreAmp: -160dBm(1Hz)
Absolute Max Level: +10dBm
RBW Min: 3kHz
RBW Max: 50MHz
Lowest Possible Sample Time: 10mS, 1mS Optional
Typical Accuracy: +/-2dB
14Bit Dual-ADC
DDC Hardware Filter
150 MIPS DSP (CPU)
Standards-Conformant Exposure Limits (ICNIRP, BGV B11, BlmSchV, etc.)
Dimensions: 210 x 140 x 25mm
Weight: 700gr
HF 6000-X V5 Specifications and Information
Support and Download Materials
HF 60105-X RF Spectrum Analyzer Specifications ***DISCONTINUED***
Frequency Range: 1MHz – 9.4GHz (Optional Low-End Extension to 9kHz)
Avg Noise Level (DANL): -155dBm(1Hz)
Avg Noise Level (DANL) PreAmp: -170dBm(1Hz)
Absolute Max Level: +20dBm
Absolute Max Level: +40dBm (Optional Upgrade)
RBW Min: 200Hz
RBW Max: 50MHz
Lowest Possible Sample Time: 5mS, 1mS Optional
Typical Accuracy: +/-1dB
14Bit Dual-ADC
DDC Hardware Filter
150 MIPS DSP (CPU)
Standards-Conformant Exposure Limits (ICNIRP, BGV B11, BlmSchV, etc.)
Dimensions: 210 x 140 x 25mm
Weight: 700gr
HF 6000-X V5 Specifications and Information
Support and Download Materials
The SPECTRAN HF 6000-X Series Specifications and Technical Information
OVERVIEW:
Spectran V4 USB-Based RF Spectrum Analyzer – Affordable, Compact, and Reliable Desktop/Bench-top RF Test and Measurement
Download full Manufacturer’s HF 6000-X Series spec sheet and brochure here.
AaroniaUSA proudly presents the Spectran HF6000-X V4 series of USB-Based/PC-Based RF spectrum analyzers. Customizable features and functions, precision measurements, and affordability combine in this series of durable handheld analyzers – the ultimate multi-purpose tool for laboratory RF measurement. The Spectran V4 X-Version series of analyzers is built to detect RF frequencies, perform data logging and monitoring, and perform precision measurements and pre-compliance testing with easy control directly via the included PC software.
GENERAL SPECIFICATIONS:
Frequency Range: 9kHz up to 9.4GHz
Typical Level Range: -170dBm to +40dBm
Lowest Possible Sample Time: 1mS
Typical Accuracy: +/-1dB
RBW Min: 200Hz
RBW Max: 50MHz
DDC Hardware – Filter
14 Bit Dual-ADC
150 MIPS DSP (CPU)
Standards-Conformant Exposure Limits: ICNIRP, BGV B11, BlmSchV
Dimensions: 210 x 140 x 25 mm
Weight: 700 gr
Internal Speaker (user-controlled on/off)
Audio Out for use with PC-based FFT Software
3mm Aluminum Housing for Maximum Shielding
50 Ohm SMA Input
Multi-Device Capability for Remote Logging/Monitoring
Measurements: WLan, UMTS, WiFi, Active Radar, GSM900, GSM1800, Bluetooth, Microwave Oven, DECT Phones, TETRA, 70cm Ham Radio, UWB (FB1-FB4)
FEATURES AND FUNCTIONS
Benchtop Usage & Data Logging
The V4 Series of USB-based RF analyzers offers the capability to perform complex test and measurement with the included full-featured PC software. Complete with remote PC-based control, multi-device capabilities, and extended data logging, and playback, these full-featured analyzers are compact, affordable test and measurement powerhouses. The intuitive user-friendly spectrum analyzer software is capable of controlling multiple Spectran units, making it extremely easy to switch between several analyzers to perform extensive remote testing in multiple locations and multiple pre-determined frequency ranges.
OPTIONS, UPGRADES, and ACCESSORIES
Internal 15dB Low-Noise Preamplifier (Option 020): Internal low noise pre-amp enabling maximum performance when measuring weak signals, controlled via true RF switch. INCLUDED IN USA MODELS AT NO ADDITIONAL CHARGE – PART NUMBERS ENDING IN “5”.
0.5PPM TXCO Timebase (Option 002): Available only for the HF60100 / 60105-X; this highly precise TXCO timebase offers significantly reduced phase noise, and allows for narrower use of filters to enhance sensitivity. Extremely important for applications including time-domain measurements and code-selective measurements of UTMS. Standard accuracy without Timebase option is 50PPM.
9kHz Frequency Extension (Option 900): Available only for the HF60100 / 60105-X; this expansion extends the low end frequency of the analyzer to 9kHz, ideal for the measurement of conducted emissions, according to interference standards such as EN55015 and EN61800-3.
40dB Low-Noise Preamplifier 1MHz-10GHz (Option 022): This option provides an external super-low-noise 40dB preamplifier, enabling maximum performance when measuring very weak low-end signals.
DC Blocker: Prevents RF input from being destroyed by DC voltages.
Calibration Resistor: Maintains the best possible calibration of the noise floor.
20dB Attenuator: Expands the measurement range to +40dBm (HF 60100/60105-X ONLY).
GPS Logger: This optional GPS logger offers 6 sensors (GPS, Gyro, 3D Tilt, Digital Compass, Height, and Accelerometer) and integrates with the analyzer directly to pinpoint locations. This is ideal for automatic for recording field measurements and generating heat maps (with Google Maps, for example), as well as visualization of network coverage for GSM, WLAN, etc.
Broadband Antennas: Spectran V5 Analyzers are fitted with high quality SMA connectors that allow them to interface directly with our full line of precision broadband antennas, including directional LP antennas, low frequency magnetic field tracking antennas, and omnidirectional radial isotropic antennas. These antenna models are available in optimized frequency ranges, and come in many varieties to suit countless RF analysis applications.
External Low Noise Pre-Amplifiers: Spectran V4 Analyzers also interface directly with our full line of external battery-powered LNA, to heighten sensitivity up to -170dB and sniff out extremely weak signals.
Near Field Probe Set: Available in passive and active models, AaroniaUSA near field probe sets offer 5 probes with or without 40dB preamplifier, to sniff out weak signals in near-field EMC testing applications.
Cables and Connectors: AaroniaUSA offers a wide variety of compatible cables and connectors, including 1 meter, 5 meter, and 10 meter SMA cables, DC blockers to prevent the 50 Ohm SMA input from being destroyed by DC voltages, 20 dB attenuator to expand the measurement range to 33dBm, SMA-SMA connectors, SMA-N connectors, and more.
The Spectran V4 Series of Handheld Spectrum Analyzers